Return to the BUILD
“In this issue, you will assemble the front right air intake and air intake base. You will then attach them to the air intake duct assembled last issue.”
Contents
Parts
Materials: All of these parts are plastic.
Magazine
- The Series – White Bird
- Build Your KI.T.T. – Step by Step
- Secret Files – Medical Scanner
Build
Turbine Assembly (7)
Step 1
Fit the flat Front Right Air Intake 01 into the hollow of the Front Right Air Intake 02, aligning the two screw holes:
Secure these parts together with two (2) BP screws:
Step 2
Fit the tab of the Front Right Air Intake 02 over the short posts at this location on the Air Intake Base 01, as shown:
Secure the Air Intake 02 to the Base with two (2) BP screws:
Step 3
Fit the rectangular pin of the Air Intake Base 02 into the matching hole at this location on the Air Intake Base 01, then secure the Base 02 into place with one (1) BP screw.
When installed correctly, the raised circular ridge on the long tab of Base 02 (arrow below) will be facing towards the installed Air Intake, as shown:
Step 4
Retrieve your Turbine Air Intake Duct assembly from the previous stage. Fit this Air Intake Base assembly into the rectangular space on the bottom of the Air Intake Duct, orientating it as shown:
Secure the Air Intake Base to the Air Intake Duct with two (2) BP screws:
Thoughts
Keep this Air Intake assembly nearby as we will install it on the engine in the next stage.
Next Up
Stage 26 – Front Air Intake Filter/Frame, Front Left Air Intake, Intake Covers, Air Intake Motor Housing/Cap