Return to the BUILD
“In this issue, you will fix the battery pack on the front left wheel arch.”
Contents
Parts
Materials: The Front Left Wheel Arch and Support Frame are metal, and the other parts are plastic.
Magazine
- The Series – Just My Bill
- Build Your KI.T.T. – Step by Step
- Secret Files – The Foundation
Build
Front Left Wheel Arch
Step 1
Fit the two pins of the Front Left Wheel Arch Support Frame into the matching holes at this location on the bottom of the Front Left Wheel Arch:
Step 2
Secure the Arch Support to the Wheel Arch from the other side with two (2) AM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Step 3
Fit the Battery Base onto the post at this location on the Front Left Wheel Arch, as shown:
Fit the Battery over the Battery Base, orientating it as shown:
Step 4
Secure the Battery and Battery Base to the Front Left Wheel Arch from below with one (1) CP screw:
Step 5
Press the thicker pins of the Battery Terminals into these holes of the Battery, rotating them into position as shown:
Thoughts
I feel like this Battery needs a label or some extra color. Perhaps this will be a future modification!
Next Up
Stage 13 – Front Left Shock Absorber Rod/Top Mounts, Spring, Windshield Washer Tank/Cap
Modelmodz do an engine components kit mod (https://modelmodz.com/Knightrider-Engine-Components-Kit-p486167433) however it’s pre-order and you’d need to go back on the build quite a way now to remove the stock and install these.